Installation Sheet

ITEM NO: 6-2706-3-109
6-2706-3-322
6-2706-3-44
LIGHTING
GLASS PANEL (4)
HEX NUT (7)
COVER (8)
WHEEL (9)
NIPPLE (3)
SOCKET (2)
COUPLING (1)
RUBBER WASHER (5)
STEEL WASHER (6)
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the nipple (3) into coupling (1), then secure them with nipple (3).
3.Install the glass panel (4),rubber washer (5) and steel washer (6) onto nipple (3), then secure them with
hex nut (7).
4.Install the cover (8) onto nipple (3), then secure them with wheel (9).
5.Fixture is ready for lamping and installation.