Installation Sheet

INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the above
illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the tube (5) onto socket (6).
3.Install the lantern (3) onto arm (4), then secure them with thumb screw (2).
4.Install the hex nut with nipple (15) into coupling (7), then secure them with hex nut with nipple (15).
5.Install the cap (8),crystal (9),tube (10) and steel panel (11) onto hex nut with nipple (15), then secure them
with hex nut (12).
6.Install the cap (13) onto hex nut with nipple (15), then secure them with finial (14).
7.Fixture is ready for lamping and installation.
ITEM NO: 6-2402-3-98
LIGHTING
WHEEL(1)
THUMB SCREW(2)
LANTERN(3)
ARM(4)
TUBE(5)