Installation Sheet

.
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the bulbs;
3.Slide the CAP(6),RUBBER WASHER(5),STEEL WASHER(4) onto the NIPPLE(7),then secure
them with HEX NUT(3);
4.Insert the WHEEL(2)and RUBBER WASHER(8) onto the NIPPLE(7),then secure it with BALL
NUT(1),hand tighten until snug;
ITEM NO: KP-5-301
FINIAL(1)
WHEEL(2)
HEX NUT(3)
STEEL WASHER(4)
RUBBER WASHER(5)
CAP(6)
NIPPLE(7)
RUBBER WASHER(8)
LIGHTING