Assembly Instructions

9
3. Install the Condiment Tray
Insert 4 M6X12 screws with 4 M6 lock washers into the pre drilled holes in the upper
portion of the front legs of the cart. Do not tighten screws. Line up the slotted holes in
the condiment tray (part 6) to the screws. Slide the condiment tray into place. Tighten
the screws.
4. Install the Wheel
Insert the axle (part 9) into the wheel (part 10) and then into axle mat. Insert the axle
into the predrilled hole located on the right front leg of the cart (see illustration below).
The axle will then insert into coordinating hole in the cart leg at the back of the cart.
Insert the additional wheel on the axle on the back side of the cart. Insert the axle
washer on the axle and secure with the M6 lock nut. There is a small wrench included.