Assembly Instructions

1. Attach the four legs to bottom panel

Using 2-M6x12 screws, secure left leg assembly (part 2) to bottom panel (part 1) and

right leg assembly (part 3) with corresponding screws, Insert the stay rod for.

condiment tray (part 5) into the mounting holes on left leg assembly and right leg

assembly. Assemble 2 additional legs in same manner (see illustration below).

2. Install the Front Panel

Insert the corresponding M6x12 screws with M6 lock washers into the pre drilled

holes in lower portion of the left and right legs located at the front of the cart. Do not

tighten screws. Line up the slots in the front panel (part 4) to the screws. Slide the

front panel into place. Tighten the 4 screws.