Assembly Instructions

20
Hand Wheel
Type I
Valve
External
Thread
Fig.24
Thermally
Sensitive Nut
Propane
Regulator
The propane tank valve connection supplied with this grill incorporates four important
safe guards: Hand Assembly, Hand Disassembly, Excess Flow Control and
Temperature-Activated Shut-Off.
a. Hand Assembly:
1. Make certain the tank valve and all the appliance valves are in the “OFF” position.
2. When connecting the regulator valve assembly to the tank, turn the
large plastic nut clockwise until it stops.
3.
Gas will not flow unless the plastic nut is completely connected.
4. HAND TIGHTEN ONLY.
WARNING:
The Type I connective coupling (see Fig.24)
supplied with your grill
must not be replaced with a diff
erent type of grill/tank connection system. Removal
will result in loss of warranty, gas leakage, fire and severe bodily harm.