Assembly Instructions

11
7. Install the R pin at Cylinder stop rod and Gas Cylinder Safety Stop
Lay cart on its side. Install three R pins in the pre drilled holes in the tips of the cylinder
stop rod (part 11) and gas cylinder safety stop (part 12). Set cart upright.
8. Install the firebox and hood assembly
Place the knob (part 17) on the valve stem (see illustration below). Set the firebox and
hood assembly (part 13) on top of the cart panel. Secure the firebox and hood
assembly with 2 M6x16 screws and 2 M6 washers at the top of each leg of the cart
(see illustration below).