Assembly Instructions

10
5. Install left and right drip tray brackets
Lock the drip tray bracket left (part 8) and drip tray bracket right (part 7) into the
mounting hole at left and right leg assembly with corresponding M4x8 screws.
6. Install the cylinder stop rod and gas cylinder safety stop
Place the cylinder stop rod (part 11) in the mounting hole at condiment tray and predrill
hole in bottom panel. Place the gas cylinder safety stop (part 12) in the predrilled holes
in bottom panel (see illustration below). Insert R pins into the predrilled hole at the tip
of the cylinder stop rod inserted through hole in condiment tray (see illustration below).