Operating instructions

57
Copying
Directional Size Magnification (inch)—Stretching and Squeez-
ing the Image into the Copy Area
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
The suitable reproduction ratios will be automatically selected when you enter the
horizontal and vertical lengths of the original and copy image you want.
Note
❐ You can enter sizes within the following ranges:
❐ If the calculated ratio is over the maximum or under the minimum ratio, it is cor-
rected within the range of the ratio automatically. However, with some ratios, parts
of the image might not be copied or blank margins will appear on copies.
1
Press the Menu key.
Note
❐ If you assign Directonal Size Magnifi-
cation (inch) function to one of the
Favorite keys, press it and go to
step 4. To assign a function to the Fa-
vorite
keys, ☛ see page 134.
GCDHEN2E
3
1
2
4
Reduce/Enlarge—Reducing and Enlarging
Metric Version
Inch Version
1 - 999mm (in 1mm steps)
0.1" - 99.9" (in 0.1" steps)