Operating instructions

Copying
45
Basic Operation
Interrupt Copying—Temporarily Stopping one Job to Copy
Something Else
Use the Interrupt key to interrupt a multicopy run and make urgently needed copies.
Reference
❐ Regarding functions that cannot be used together with this function, ☛ see page
96.
1
Press the Interrupt key. The ma-
chine will stop the copy run and store
the present settings in the memory.
The machine will return to the ready
condition.
2
Remove the previous originals. Set
your originals for interrupt copying on
the exposure glass (platen glass) or
in the document feeder.
3
Make your copies.
4
After interrupt copying is completed,
press the Interrupt key again. The
machine will recall the previous copy
settings.
5
Reset the previous originals and press
the Start key to resume the previ-
ous run.