Operating instructions

Copying
39
Copying onto non-standard size paper with the bypass tray
Preparation
❐ You can register non-standard paper sizes you use often in keys [Custom 1], [Cus-
tom 2], and [Custom 3] with the user tools. ☛ See page 126.
Note
❐ Be sure to set the size. Otherwise, a paper misfeed might occur.
1
Open the bypass tray.
2
Select one of desired paper types or
settings with the
keys.
3
Press the [Custom] key.
4
Select [Custom1], [Custom2], [Cus-
tom 3] or [Imput Size] with the
keys. Then press the [OK] key.
Note
❐ If you select [Custom1], [Custom2]
or [Custom3] go to step 8.
5
If you select [Imput Size] in step 4,
enter the vertical paper size with the
Number keys, then press the or
# key.
Note
❐ To change the value entered, press
the Clear/Stop key and enter the
new value.
6
Enter the horizontal paper size with
the Number keys, then press the
[OK] key.
TRSS100E
TRSS115E
Basic Operation
TRSS100E
TRSS111E