Operating instructions

38
3
Press the [l/p] key to select paper
direction.
4
When you select [OHP] in step 2,
press the [OK] key then select
whether blank slip sheets are inserted
between OHP transparencies with the
keys.
Note
❐ When you select [On], make sure that
the paper for slip sheets is identical in
size and direction to the OHP trans-
parencies set in the paper tray.
5
Press the [OK] key.
6
Adjust the paper guides to the paper
size.
Note
❐ Make sure that the paper guides match
the paper size. If the paper guides are
not adjusted to the paper size prop-
erly, paper might be skewed or paper
misfeed might occur.
❐ With large copy paper (more than
A4l, 8
1/2" x 11"l), swing out the ex-
tender.
7
With the side you wish to copy onto
face up, insert the paper into the by-
pass tray until it stops.
8
Set your originals, then pres the
Start key.
Basic Operation
TRSH050E
1
3
2
4
1: Horizontal size
2: Vertical size
3: Extender
4: Paper guides
TRSS100E
TRSS112E
TRSS100E
TRSS116E