Operating instructions

Copying

❐ When you copy onto OHP transparencies, you can select whether a blank slip sheet

is inserted between OHP transparencies

❐ When you set several sheets at a time, fan them to get air between them before

❐ If the copy paper is curled, gently roll it to remove the curl.

❐ When you copy onto OHP transparencies, insert them with the copy side up.

❐ Do not stack copy paper above the limit mark.

❐ When setting non-standard size paper, be sure to set the size after pressing the

[Custom] key.

Copying onto standard size paper with the bypass tray

Note

❐ When you copy onto the reverse side of paper that has been already copied onto,

☛ See page 41.

Open the bypass tray.

Select [Normal], [Thick] or [OHP]

with the

keys.

Basic Operation

TRSH040E

TRSS100E

TRSS116E