Operating instructions

36
Copying from the Bypass Tray
Use the bypass tray to copy onto thick paper, adhesive labels, OHP transparencies, or
non-standard size paper. Also use the bypass tray to copy onto the reverse side of
paper that has already been copied onto.
Note
❐ The following limitations apply:
❐ Select one of following settings or key:
[Normal]: normal paper
[Thick]: thick paper, post cards, adhesive labels, translucent paper
[OHP]: OHP transparencies
[Duplex]: Use for copying onto the reverse side of paper that has been already
copied onto. ☛ See page 41.
[Duplex Thick]: Use for copying onto the reverse side of thick paper (105-160g/m
2
,
28-43 lb) that has been copied onto. ☛ See page 41.
[Custom]: Use to specify a non-standard sized. ☛ See page 39.
❐ If the copy paper is bend, correct it before setting paper in the bypass tray. If the
bent is not corrected, a paper misfeed might occur.
Basic Operation
Normal paper (52 – 105g/m
2
, 14 – 28 lb)
Thick paper (105 – 160g/m
2
, 28 – 43 lb)
Post cards
OHP transparencies
Adhesive labels
Translucent paper
Standard size Metric version:
l: A3, B4, A4, B5, A5, B6, A6, 12" x 18", 11" x 17"
p: A4, B5, A5, 81/2" x 11"
Inch version:
l: 12" x 18", 11" x 17", 81/2" x 11", 51/2" x 81/2"
p:81/2" x 11", 51/2" x 81/2"
Non-standard size Metric version:
Vertical: 100 – 305mm (in 1mm steps)
Horizontal: 140 – 457mm (in 1mm steps)
Inch version:
Vertical: 3.9" – 12.0" (in 0.1" steps)
Horizontal: 5.5" – 18.0" (in 0.1" steps)
Normal paper: 50 sheets
Thick paper, OHP transparencies: 30 sheets (smaller than 8" x 13")
15 sheets (8" x 13" or larger)
Adhesive labels: 30 sheets
Translucent paper: 50 sheets
Post cards: 25 sheets
1: Horizontal
2: Vertical
3: Feed
direction
GCBYPA1E
1
2
3
Acceptable
paper types
Number of
sheets that
can be set at
one time