Operating instructions

Basics

Setting Originals of Different Sizes in the Document

Feeder

You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into the

document feeder. These originals are individually fed onto and removed from the ex-

posure glass (platen glass).

Preparation

❐ To use this function, you have to select ADF Mixed Sizes mode with the user tools.

See page 133.

Limitation

❐ The weight of originals that can be set with this function is 52 - 81g/m

, 14 - 20 lb.

❐ Smaller size originals might be skewed a little.

Note

❐ If your stack of originals contains pages of different sizes, make sure that:

• Longer originals are at the bottom of the stack, and shorter originals are at the top.

• All originals are flush with the back fence of the document feeder.

Align the rear and left edges of the

originals as shown in the illustration.

Adjust the guide to the widest original

size.

Set the aligned originals face up into

the document feeder.

Setting Originals of Different Sizes in the Document Feeder

1: Set into the document feeder

2: Vertical size