Operating instructions

13
Basics
Turning on the Power
1
Press the operation switch to make
the On indicator light up.
Note
❐ If the power is not turned on when the
operation switch is pressed, check if
the main power switch is on. If off, turn
it on.
❐ During the warm-up period (about 7
minutes), you can use the Auto Start
function. ☛ See page 46.
When the machine is set for user codes
1
Enter your user code using the Num-
ber
keys. Then press the # key.
Note
❐ To prevent others from making copies with your user code, press the Clear Modes
key and the Clear /Stop key simultaneously after copying.
Reference
❐ For setting user codes, ☛ see page 131.
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
1
Press any key.
The machine will return to the ready condition.
Note
❐ The machine will also return to the ready condition when an original is set in the
document feeder, or when the platen cover or the document feeder is opened.
Starting the Machine