Operating instructions

7
Where it is & What it is
17. On indicator
This indicator lights up when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
18. Operation switch
Press this switch to turn the power on (the
On indicator lights up). To turn the power
off, press this switch again (the On indi-
cator goes off).
19.
Clear/Stop key
Press to cancel the copy number entered.
While copying, press to stop copying.
This key is also used to clear data.
20.
Start key
Press to start copying. Use to set the Auto
Start.
21.
# key
Use to enter data in selected modes.
22.
Number keys
Use to enter the desired number of cop-
ies. They are also used to enter data.
23.
keys (Color Mode keys)
Press to select the color mode. ☛ See
page 27.
24.
Original key
Press to select original type you use. ☛
See page 31.
25.
keys (Cursor keys)
Press to select an item on the panel dis-
play.
26.
Auto Image Density key
Press to make copies in Auto Image Den-
sity mode. ☛ See page 25.
27.
Darker key
Press to increase the image density. ☛
See page 25.
28.
Lighter key
Press to lower the image density. ☛ See
page 25.
29.
Projector key
Press to make copies with the projector
unit. ☛ See page 145.
30.
Auto Reduce/Enlarge key
Enlarges or reduces the image automati-
cally according to the specified paper
size. ☛ See page 43.
31.
Zoom key
Enlarges or reduces in 1 % steps. ☛ See
page 53.
32.
Image Adjustment key
Press to change the default settings for
image adjustment. ☛ See page 91.
33.
Bypass Feed key
Press to select the paper type when copy-
ing with the bypass tray. ☛ See page 36.
Operation Panel