Operating instructions

Projector Unit
Operation
167
Negative—Special Sizes
1
Insert the “N” (Negative) filter in the
left slot as shown in the illustration.
Then press the
# key.
Note
❐ Be careful to insert the filter as shown,
not the other way around.
2
Cut the positioning sheet to match the
film size.
Reference
❐ Regarding the positioning sheet, ☛
see page 157.
3
Place the positioning sheet under the
mirror unit (on the exposure glass).
Then press the
# key.
Note
❐ Place the marked corner of the film
position sheet at the rear left corner
of the exposure glass.
❐ Before going to the next step, make
sure that the fresnel lens is lowered
in position.
4
Set the base film in the film strip
holder.
Reference
❐ Regarding setting the base film, ☛ see
page 155.
TRSR0F0E
1
1: Filter
TRSR0G0E
1
1. Positioning sheet
Selecting the Film Type and Perform Shading