Operating instructions

Projector Unit
Operation
165
6
Pull out the film strip holder with the
base film.
7
Set the film in the holder.
Reference
❐ Regarding setting the film, ☛ see
page 156.
8
While pressing the holder lever to the
left, insert the holder in the right slot.
9
Adjust the holder by sliding it up and
down to position the correct frame for
copying. Then press the
# key.
0
If needed, adjust the color, density, or
focus.
Reference
❐ For details, ☛ see page 171.
TRSR0Z0E
TRSR0Y0E
Selecting the Film Type and Perform Shading
TRSR0N0E
2
1