Operating instructions

164
Negative—35mm (Film Strip Holder)
1
Insert the “N” (Negative) filter in the
left slot as shown in the illustration.
Then press the
# key.
Note
❐ Be careful to insert the filter as shown,
not the other way around.
❐ Before going to the next step, make
sure that the fresnel lens is lowered
in position.
2
Set the base film in the holder.
Reference
❐ Regarding setting the base film, ☛ see
page 155.
3
Open the film cover and while press-
ing the holder lever to the left, insert
film strip holder the right slot.
4
Insert the holder until the ★ mark is
placed as shown in the illustration.
Then press the
# key.
5
To perform shading, press the # key.
Note
❐ The machine will start shading auto-
matically.
TRSR0F0E
1
1: Filter
TRSR0J0E
1
1: Holder lever
Selecting the Film Type and Perform Shading