Operating instructions

Projector Unit
Operation
159
Positive—35mm (Slide Holder/Mount Film Holder/Film Strip
Holder)
1
Open the film cover and insert the “P”
(Positive) filter firmly in the left slot as
shown in the illustration. Then press
the
# key.
Note
❐ Be careful to insert the filter as shown,
not the other way around.
❐ Before going to the next step, make
sure that fresnel lens is lowered in
position.
2
To perform shading, press the # key.
Note
❐ The machine will start shading auto-
matically.
3
Set the film (slide or strip) in the holder.
Reference
❐ Regarding setting the film, ☛ see
page 156.
4
While pressing the holder lever to the
left, insert the holder in the right slot.
Selecting the Film Type and Perform Shading
TRSR0F0E
1
TRSR0Y0E
1. Filter