Operating instructions
140
Do’s and Don’ts
R
CAUTION:
r
•
When you move the machine, unplug the power cord from the wall outlet
to avoid fire or electric shock.
•
When the machine will not be used for a long time, unplug the power
cord.
• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you might feel the exposure glass is heated. But
this is not a malfunction.
• You might feel warm around the ventilation hole. This is caused by exhaust air, and
not a malfunction.
• Do not turn off the operation switch while copying. When turning off the operation
switch, make sure that copying is completed.
• The machine might fail to produce good copy images if there should occur conden-
sation inside caused by temperature change.
• Do not open the covers of machine while copying. If you do, misfeeds might occur.
• Do not move the machine while copying.
• If you operate the machine improperly or a failure occurs on the machine, your
machine settings might be lost. Be sure to take a note of your machine settings.
• Supplier shall not be liable for any loss or damages resulting from a failure on the
machine, loss of machine settings, and use of the machine.
Do’s and Don’ts