Operating instructions

133
Changing the
Copier’s Settings
User Tools
ADF/Sorter
Description
When you set one original at a time in the document feeder, the Auto Feed
indicator lights for a selected time after an original is fed to show that the
document feeder is ready for another original. The time can be set from 1
second to 99 seconds.
Note
❐ Default: 5 seconds
Use when changing the type of originals to be fed. Select this function to
avoid damaging thin originals (40 - 52g/m
2
, 11-14 lb) set in the document
feeder.
Note
❐ Default: Off
By default, you cannot set originals of different sizes at one time in the
document feeder. You can cancel this setting.
Note
❐ Default: Off
❐ If you select [On], the copying speed will be reduced.
❐ When setting different length originals, all originals must be flush with
the back fence of the document feeder.
❐ Smaller size originals might be skewed a little.
By default, the Auto Paper Select is selected when you set originals in the
document feeder. You can cancel this setting.
Note
❐ Default: On
You can disable sorting, stacking, or stapling in Full Color mode to maxi-
mize quality of full color copies.
Note
❐ Default: Available (Sorting, stacking, or stapling can be used in Full
Color mode.)
You can have the machine select Sort mode automatically when you insert
two or more originals in the document feeder and make two or more copies
from each original.
Note
❐ Default: On
Menu
SADF Auto Reset
Thin Paper Mode
ADF Mixed Sizes
ADF Auto Paper
Select
FC Copy Sorting
Auto Sort Mode