Operating instructions

130
User Tools
Description
You can set the machine to recall program setting when the machine is
turned on or when modes are cleared.
Note
❐ Default: Normal
❐ Your service representative can store the program setting.
❐ Your service representative can select whether the program setting is
recalled when the machine is turned on or when modes are cleared.
You can assign user codes to each color mode. Operators must input their
user codes before using each color mode (Full Color, Black, Single Color,
and Twin Color). The machine keeps count of the number of copies made
under each user code.
1. Select your desired color mode with the keys.
2. Press the [Select] key.
3. Press the [Exit] key.
Note
❐ Repeat steps 1 and 2 until you finished designating color modes.
You can check the number of copies made using each user code. Also, you
can clear each code’s counter.
1. Input user code you want to check its number of copies with the Number
keys.
2. Press the [OK] key.
Note
❐ You can check the number of copies.
❐ To clear the counter, press the [Reset] key. Then press the [Yes] key.
3. Press the [Exit] key.
You can reset the counter for all user codes and delete all user codes.
1. Select [User Code] to delete all user codes or [Counter] to reset the
counter for all user codes with the keys.
2. Press the [Yes] key.
3. Press the [Exit] key.
Menu
Initial Mode Set
Accessible Modes
Counter Reset
Clear Code &
Counter
Key Operator Tools
Use these tools to manage use of the machine.
Note
❐ Enter a previously registered key operator code with the Number keys.
Reference
About the key operator code, ☛ see page 127.