Operating instructions

126
User Tools
Description
You can specify a bin to which documents are delivered for each feature
(copy and printer).
1. Select [Copy] or [Printer] with the keys. Then press the [OK] key.
2. Select a bin with the keys. Then press the [OK] key.
Note
❐ Default: Copy: First bin
Printer: First bin
You can adjust the brightness of the panel display.
Note
❐ Default: level 4
When this mode is off, narrow margins on all 4 sides of the original are not
copied.
When you turn it on, margins 1, 2 and 3 are copied.
Note
❐ Default: Off
❐ You cannot cancel the leading edge margin (margin 4).
You can register the non-standard size paper when you make copies
with the bypass tray.
1. Select [Custom1], [Custom2], or [Custom3] with the keys.
2. Press the [OK] key.
3. Enter the vertical size with the Number keys, then press the # key.
4. Enter the horizontal size with the Number keys, then press the [OK]
key.
Note
❐ Adjustment value:
Metric version: Vertical: 100 - 305mm
Horizontal: 140 - 457mm
Inch version: Vertical: 3.9" - 12.0"
Horizontal: 5.5" - 18.0"
❐ To clear the custom paper size, select the [Delete] key.
Menu
Output Tray Prio.
(For 3-bin sorter only)
Display Contrast
3 Side Full Bleed
Bypass Custom Size
Key Operator Tools
Use these tools to manage use of the machine.
Note
❐ Enter a previously registered key operator code with the Number keys.
Reference
About the key operator code, ☛ see page 127.
1: 2±2mm, 0.08"±0.08"
2: 2±2/–1.5mm, 0.08"+0.08"/–0.06"
3: 2±2mm, 0.08"±0.08"
4: 5±2mm, 0.2"±0.08"