Operating instructions

124
User Tools
Settings You can Change with the User Tools (System Set-
tings)
Reference
❐ For how to access the user tools, ☛ see page 119.
System setting
Description
The beeper (key tone) sounds when a key is pressed. This beeper can be
turned on or off.
Note
❐ Default: On
Choose whether the machine beeps when it becomes ready for a copy run
after power up.
Note
❐ Default: On
❐ When the “Panel Tone” is set to Off, the beeper does not sound even if
the “Ready/Tone” is set to On.
The copy counter can be set to show the number of copies made (Count
Up), or the number of copies remaining to be made (Count Down).
Note
❐ Default: Count Up
The machine returns to its prioritized mode automatically after your job is
finished, after the selected time. This function is called “System Reset”.
The time can be set from 10 to 990 seconds (in 10 seconds steps), or off.
1. Select [On] or [Off] with the keys.
2. When you select [On], enter the system reset time with the Number
keys. Then press the [OK] key.
Note
❐ Default: On (60 seconds)
How long the machine waits before switching to the default mode if no op-
eration has been performed after an operation has finished. The time can
be set from 10 to 990 seconds (in 10 seconds steps), or off.
1. Select [On] or [Off] with the keys.
2. When you select [On], enter the time with the Number keys. Then
press the [OK] key.
Note
❐ Default: On (60 seconds)
Menu
Panel Tone
Ready/Tone
Copy Count Display
System Reset
Function Reset