Operating instructions

Adjustment and
Color Memory
91
Image Adjustment
You can change the following default settings for image adjustment:
Image Adjustment
You can adjust the edges of the image to make the image sharper or softer.
Reference
❐ For copy samples, ☛ see page 14 of the Color Copy Quick Guide.
Note
❐ Default: level 4
You can adjust the contrast between light parts and dark parts of the image.
Reference
❐ For copy samples, ☛ see page 14 of the Color Copy Quick Guide.
Note
❐ Default: level 5
You can adjust the background density control.
Reference
❐ For copy samples, ☛ see page 14 of the Color Copy Quick Guide.
Note
❐ Default: level 5
❐ If coping a newspaper or an original with a dark background, adjust the back-
ground density to a lighter setting.
❐ If part of the original is marked with a highlighting pen, adjust the background
density to a darker setting. However, because the color of a highlighting pen is
difficult to duplicate, it might be copied in different colors or some colors might not
be copied.
You can make copies in pastel tones.
Reference
❐ For copy samples, ☛ see page 14 of the Color Copy Quick Guide.
Note
❐ Default: level 9 which yields a normal color copy
You can adjust the black toner density to make the black parts clearer in Full Color
mode.
Note
❐ Default: level 5
❐ Adjust this setting to a darker setting when you want to copy letter parts clearly in
black.
❐ Adjust this setting to a lighter setting when the original image is dark.
Sharp/Soft
Contrast
Background
Density
Pastel
U.C.R.
Adjustment