Operating instructions

Getting Started
2
1
Network connections
The Network Interface Board supports 10BASE-T or 100BASE-TX connections.
You can use the machine in the following network environments:
• Using the appropriate network management software and printer driver.
• Attaching the machine to a networked computer set up as a server.
*1
Under Windows NT 4.0, only x86 CPU is supported.
*2
Only RICOH-SCRIPT2 is available.
*3
Under Windows 95/98/NT 4.0 only.
In a mixed network environment, the protocol switches automatically.
Reference
For more information on resolving network connection problems, see the
“Operating Instructions” of Network Interface Board included as a PDF file
in the CD-ROM.
Note
❒
Consult your network administrator before connecting the machine to a net-
work.
Important
❒
Rating voltage of the 10BASE-T/100BASE-TX connector; Max. DC 5V.
Parallel cable requirements
Connect the machine to the host computer using a Parallel Port. This machine
does not provide the parallel cable to connect the machine to the host computer.
The machine's parallel interface is a standard bi-directional interface. It requires
a standard 36-pin parallel cable compliant with IEEE 1284 and a Parallel Port
available on the host computer.
Note
❒
Do not use a parallel cable that is longer than 2.5 meters (8.2 feet).
Important
❒
Rating voltage of the parallel interface connector for the computer; Max. DC
5V.
Client
Windows 95, 98, NT 4.0
*1
, Mac OS 7.6~8.6
*2
Driver
IPDL-C, RICOH-SCRIPT2
File Server
NetWare 3.x, NetWare 4.x, NetWare 5
Protocol
IPX/SPX, TCP/IP, AppleTalk, NetBEUI
*3