Operating instructions

Adjusting the Color Calibration of the Printer
34
4
Operation on the Copy Function Mode
Preparation
The operation panel of the copy machine must be used to follow the proce-
dure.
A Press
{
User Tools
}
.
B Press
[
Auto Color Calibration
]
and select
[
Printer Mode
]
.
Note
❒
If the machine is a simplex machine with the hard key type, select
[
Copy
features
]
, select
[
Image Adjustment
]
and select
[
Auto Color Cal.
]
.
C Press
[
Start
]
.
Note
❒
If the machine is a simplex machine with the hard key type, press
[
OK
]
.
D Press
[
Print Start
]
to print the test pattern.
Note
❒
If the machine is a simplex machine with the hard key type, press
[
Print
]
.
❒
The test pattern is printed on A4K,11"×8
1
/
2
"K. If A4K,11"×8
1
/
2
"K is not
available, the test pattern is printed on either B4L, 8
1
/
2
"×14''L or A3L,
11''×17''L.
❒
The test pattern is not counted on the counter.
E Place the test pattern on the exposer glass (platen glass) and place a few
pieces of blank paper on the back of the test pattern.
Limitation
❒
Do not place them in the document feeder. Put them on the exposure glass
(platen glass). Using the document feeder may cause a misoperation.
F Press
[
Scan Start
]
to adjust the color calibration.
Note
❒
If the machine is a simplex machine with the hard key type, press
[
Scan
]
.
G Press
{
User Tools
}
.