Operating instructions

Other Printing Problems
31
3
The area on the page that
should be white or free of
toner is a hazy gray.
Check the image density setting.
Adjust the Color Calibration.
Image density is too light. Turning on [
Toner Saving
] can cause the output to be
blurred and result in very thin lines not printing at all.
With color printing, toner saving can cause abnormal
coloring. Try printing again after turning [
Toner Saving
]
off. See the printer driver's online help for details about
changing the settings on this tab.
If the message "Add Toner XXX" is on the panel dis-
play, replace the toner cartridge for the indicated color.
For more information on replacing the toner cartridge,
see the operating instructions that describes copy func-
tions.
You might be using paper not supported by this print-
er. Use the appropriate type of paper. For more infor-
mation of supported paper, see the operating
instructions that informs the copy functions.
Toner is not fused well when
printing on thick paper or
OHP transparencies.
The printer is not in the "Thick Paper" or "OHP Trans-
parency" mode. Select [
Thick Paper
], [
OHP Transparency
]
(IPDL-C) or [
OHP
] (RPS2) in the [
Paper Type
] box of the
printer driver.
The color of the printout is
different from the color on
the computer's display.
The toner based color system used by the printer is dif-
ferent from the light based color system of the comput-
er screen.
⇒
P.73
“Color Guide”
Turning on the [
Toner Saving
] can cause color irregular-
ities.
Check the settings of the printer driver's [
Color Setting
]
tab and restore the default settings.
Adjusting the color calibration.
⇒
P.33
“Adjusting the
Color Calibration of the Printer”
Status Possible Causes, Descriptions, and Solutions