Operating instructions

Troubleshooting
30
3
It takes too much time to
print the first page.
The data is so large or complex that it takes time to pro-
cess it. If the
Data In
indicator is blinking, the data pro-
cessing is being done. Just wait until it resumes.
The Energy Saver mode might be enabled. In the Ener-
gy Saver mode, it takes time for the machine to warm
up.
It takes too much time to
print.
Photographs and other data intensive pages take a
long time for the printer to process, so simply wait
when printing such data.
You can also speed up printing by using the printer
driver to select [
1 bit
] as the print mode.
The printer takes more time to print documents that
contain a large volume of data. A blinking or lit
Data
In
indicator means that data is reaching the printer, so
just wait for the data to be processed and printed.
If "Please Wait" appears on the panel display, the print-
er is now warming up or busy. Wait for a while.
The printer takes more time to print if the "Interleave
Print" is set to on in the copy function. For more infor-
mation, see the operating instructions that describes
copy functions.
It takes too much time to per-
form black and white print-
ing.
[
Color
] is selected on the printer driver. Change this set-
ting to [
Black and White
] in the [
Color Mode
].
Note
❒
Some applications ignore the color mode setting
made with the printer driver.
Paper is not fed from the de-
sired paper tray.
The printer driver setting is not correct. Change the set-
ting. See the printer driver's Help for further details.
Desired paper size is not
used for the output.
The printer driver setting is not correct. Change the set-
ting. See the printer driver's Help for further details.
Specified paper is not loaded correctly in the paper
tray. Remove the paper from the tray and reload the
specified paper correctly.
Note
❒
If you select Bypass Tray to print with IPDL-C, you
must set the paper size both on the printer driver
and on the operation panel.
❒
If you select Bypass Tray to print with RPS2, you
can set the paper size on the operation panel.
Status Possible Causes, Descriptions, and Solutions