Operating instructions

Other Printing Problems
29
3
Other Printing Problems
Note
❒
For more information on IPDL-C, see the printer driver's Help.
❒
For more information on RICOH-SCRIPT2, see the “Operating Instructions”
included as a PDF file in the CD-ROM.
Status Possible Causes, Descriptions, and Solutions
The
Data in
indicator will be
off after blinking or lit for a
while.
It might occur when the printer does not have enough
memory to print a page.
The following are the actions you should take when
you encounter memory shortage problems. If these ac-
tions do not solve the problem individually, try them
in combination with each other.
A
Change the Color level to [
1 bit
].
Use the printer property to change the Color Level
to [
1 bit
].
B
Turn on "Image Memory".
Use the printer's "System Menu" to turn on "Image
Memory".
Image is printed on the re-
verse side of the paper.
The paper in the paper tray is upside down.
• Standard Tray (Tray 1~ 4)
Load paper with the print side down.
• Bypass Tray
Load paper with the print side up.
Paper misfeeds occur fre-
quently.
Check if the paper tray is set correctly. If not, set it cor-
rectly.
Paper is not loaded correctly in the paper tray. Remove
the paper from the tray and reload it correctly.
Check the paper type settings. The type of paper set
with the printer driver might be different from the ac-
tual paper or media type. Make the correct paper or
media type setting.
You might use paper not supported by this machine.
Use the appropriate type of paper. For more informa-
tion on supported paper by this machine, see the oper-
ating instructions that describes the copy functions.