Operating instructions

Troubleshooting
26
3
Machine Does not Print
Possible Cause Solutions
Is the power on? Confirm that the power cord is securely plugged into the
wall socket.
Turn on the power switch.
Is the interface cable
properly connecting the
printer to your comput-
er connected securely?
Connect the interface cable properly. If there are any con-
nectors or screws, confirm that they are fastened securely.
Are you using a correct
interface cable?
The type of interface cable you should use depends on your
computer. Be sure to use the correct one.
If the cable is damaged or worn, replace it with a new one.
Does the
On Line
indi-
cator stay on?
Press
{
On Line
}
to light it up.
Is the paper set? Load paper into the paper tray or on the bypass tray.
Is paper left in the sorter
bin?
Remove paper from the sorter bin.
Is the machine working
as a copier?
It may not be able to use the machine as a printer when the
machine is working as a copier.
Does the
Error
indicator
stay red?
Check the error message on the panel display and take the
required action.