Operating instructions

Troubleshooting
22
3
Energy Save Mode The printer is in Energy Save
mode.
Wait for a while.
Fuser Oil is Empty Fuser oil is empty. Replace the fuser oil . Contact
your sales or service repre-
sentative.
No Paper There is no paper of the indi-
cated paper size in the paper
tray being used.
Load paper of the indicated
paper size into the paper tray
being used.
Reference
See the operating instruc-
tions that describes copy
functions.
No Staple There is no staple. Replace staples.
Reference
See the operating instruc-
tions that describes copy
functions.
Paper in Duplex Tray There is paper left in the du-
plex tray.
Remove the paper from the
duplex tray.
Paper on Sorter Bin There is paper left in the sort-
er bin.
Remove the paper from the
sorter bin.
Paper Tray: Not Set
Correctly
The paper tray is not installed
correctly.
Install the paper tray correct-
ly.
Low on XXX Toner The indicated toner is low or
has run out.
Replace the toner cartridge.
XXX Toner is Empty The indicated toner is empty. Replace the toner cartridge.
WarmUp The printer is preparing for
printing.
Wait until the printer is
warmed up.
Waste Toner is Full The waste toner bottle is full. Replace the waste toner bot-
tle. Contact your sales or ser-
vice representative.
Message Description Comments