Operating instructions

Error & Status Messages on the Operation Panel
19
3
Power Off / On
No : XXX-YYYYYYYY
There is communication error
between the engine and the
controller.
Turn the power off and on. If
this does not clear the prob-
lem, contact your sales or ser-
vice representative.
Printing ... Doing print job. Wait for a while.
Note
❒
This message appears
only in the RICOH-
SCRIPT2 mode.
Processing Print data is being processed. Wait for a while.
Ready The printer is ready for print-
ing.
It is not an error message.
The printer is working prop-
erly.
Remove Paper
From Duplex Tray
Paper is left in the Duplex
tray.
Remove the paper from the
Duplex tray.
Reference
See the operating instruc-
tions that describes copy
functions.
Remove Paper
From Sorter
Paper is left in the sorter bin. Remove the paper from the
sorter bin.
Reference
See the operating instruc-
tions that describes copy
functions.
Reset Paper Tray
Correctly
The paper tray is not installed
correctly.
Install the paper tray correct-
ly.
Reference
See the operating instruc-
tions that describes copy
functions.
Resetting ... A print job was interrupted
by pressing
{
Reset
}
.
Wait for a while.
Waiting Printer is waiting for the next
data to print.
The menu is about to be set
on the printer's operation
panel.
Wait for a while.
Message Description Comments