Operating instructions

Setting up the Printer Driver and Canceling a Print Job
12
2
C Confirm that the printer you want to use is shown in
[
Format for:
]
. Then, use
[
Paper
]
to select the paper size you want to use.
Note
❒
If the printer is now shown in the
[
Format for:
]
box, use the pop-up menu to
display a list of available printers.
Reference
The actual appearance of the
[
Page Setup
]
dialog box depends on the appli-
cation you are using. See the documentation that comes with the Macin-
tosh for details.
D After configuring the settings, click
[
OK
]
.
-
Small Size Print Area
This printer supports printing on print areas such as “A4 Small” and “Letter
Small” when printing from a Macintosh, only with specific versions of the driv-
er. Printing with the LaserWriter 8.4x (or later) driver supports printing on both
standard and small print areas. However, with the LaserWriter 8.3x (or earlier),
the small print area options are not displayed.
With LaserWriter 8.3x (or earlier), select A4, for example, and click
[
Options
]
in
the
[
Page Setup
]
dialog box, then use the
[
Larger Print Area
]
option. Checking
[
Larg-
er Print Area
]
produces the same printing result as the LaserWriter 8.4x (or later)
standard A4 print area. Unchecking the
[
Larger Print Area
]
produces the same re-
sult as the LaserWriter 8.4x (or later) “A4 Small” print area.
Setting up for printing from an application
A Open the file you want to print.
B On the
[
File
]
menu, click
[
Print
]
.
The
[
Printer
]
dialog box appears.
C Confirm that the printer is selected in the
[
Printer
]
box, and then make the
printer settings you want.
Reference
For more information on setting up for printing from an application, see
the “Operating Instructions” of RICOH-SCRIPT2 (RPS2) that is included
in this CD-ROM.
D After configuring the settings, click
[
Print
]
.