Operating instructions

Installing the Printer Driver and Software
34
3
B Click the
[
LaserWriter 8
]
icon.
C In the
[
Select a PostScript Printer
]
list, select the name of the printer you want
to use by clicking it, and then click
[
Create
]
.
Note
❒
If your network has multiple zones, click the name of the zone the printer
belongs to in the
[
AppleTalk Zones
]
list in the lower left side of the
[
Chooser
]
dialog box.
D Select the name of the printer by clicking it, and then click
[
Select
]
.
Note
❒
Be sure to select the PPD file correctly. Otherwise, you may not use options
because options that you can use depend on the printer.
The PPD file is set up and the LaserWriter 8 icon appears at the left of the
printer name in the list. Next, follow the procedure on P.34 “Setting up op-
tions” to make the option settings, or to close the
[
Chooser
]
dialog box.
Setting up options
A On the Apple menu, select
[
Chooser
]
.
B Click the
[
LaserWriter 8
]
icon.
C In the
[
Select a PostScript Printer
]
list, select the name of the printer you want
to use by clicking it, and then click
[
Setup
]
.
Note
❒
If your network has multiple zones, click the name of the zone the printer
belongs to in the
[
AppleTalk Zones
]
list in the lower left side of the
[
Chooser
]
dialog box.
D Click
[
Configure
]
.
A list of options appears.
E Select the option you want to set up and the appropriate settings for it.
Note
❒
If the option you want to set up does not appear, the PPD file has not been
set up correctly. Check the name of the PPD file shown in the dialog box.
Reference
For more information on setting up options, see the “Operating Instruc-
tions” for RICOH-SCRIPT2 provided as a PDF file which is included in the
CD-ROM.