Operating instructions

Appendix
80
5
Additional information
• When you click
[
Active Lease
]
on the
[
Scope
]
menu of DHCP manager, a list of
client leases appears. When the reserved IP address is not active, the name of
the reservation is the name entered in the Client Name field of the Add Re-
served Clients dialog box. When the reserved IP address becomes active, the
client name changes to the printer name configured by the Network Interface
Board. Only the first 13 letters of the printer name appear here. When you use
the printer with Multidirect Print, use the host name of the printer as the
[
Cli-
ent Properties
]
Client Properties dialog box.
• When the DHCP server does not assign an IP address, the Network Interface
Board uses 11.22.33.44 as a temporary IP address. You can confirm the print-
er's IP address on the network configuration page.
• Because 11.22.33.44 is a special IP address, you cannot print using this ad-
dress.
• When using the DHCP relay agent in a network environment that uses a dial
up router to connect to the Network Interface Board, an increase in commu-
nication fees can occur.
When Using NIB Setup Tool
If the Network Interface Board cannot browse using the TCP/IP protocol, con-
firm that the TCP/IP environment is correctly configured in your computer.