Operating instructions

Appendix
78
5
When Printing PostScript from Windows
When printing PostScript from Windows, see the “Printer Reference” that comes
with your machine, and configure it to use the Network Interface Board with the
printer driver.
When Printing it with NetWare
Configuring the form feed
You should not configure the form feed on NetWare. You do not need to config-
ure on NetWare in order to control a new page with the printer driver of Win-
dows. If this setting is configured, the printer might not print properly. If you do
not want to use the form feed, configure it according to the OS you are using as
follows.
• With Windows 95/98, clear the
[
Form feed
]
check box with the
[
Printer Settings
]
tab in the printer properties dialog box.
Configuring the banner page
Do not configure a banner page on NetWare.
If you do not want to add a banner page, configure it according to the OS you
are using as follows.
• With Windows 95/98, clear the
[
Form feed
]
check box with the
[
Printer Settings
]
tab in the printer properties dialog box.
• With Windows NT 4.0, click
[
Start
]
, point to
[
Setting
]
, point to
[
Control Panel
]
and click it. Select
[
Network
]
and select
[
Novell Client Configuration for Windows
NT
]
in the
[
Service
]
tab and click
[
Properties
]
. The
[
Novell Client Configuration
]
box
appears. Clear the
[
Enable banner
]
check box in the
[
Default Capture
]
tab in
[
No-
vell Client Configuration
]
.
Printing after resetting the printer
After resetting the remote printer, it will be cut off from the print server for about
30-40 seconds before connecting again. Due to the NetWare specification, print
jobs may be accepted, but they will not be printed during this interval.
When using the printer as a remote printer, wait about 2 minutes after resetting
the printer before attempting to print.