Operating instructions

Macintosh Configuration
48
4
Configuring the Printer
Use the operation panel to activate the EtherTalk protocol (The default setting is
active).
Reference
For more information on configuration, see the "Printer Reference" that is pro-
vided as a paper manual.
Changing Printer Name
If the network has several same model printers, the names will be the same.
Printers that have the same name will have their names changed slightly in the
Chooser. For example, three printers named “printer” will appear in the chooser
as “printer0”, “printer1” and “printer2”.
Use an application such as
Apple Printer Utility
or
LaserWriter Utility
to
change printer names in the Macintosh EtherTalk environment. These utilities
are distributed by Apple Computer, Inc.
Changing Zone
It may be necessary to change the zone configuration.
Use an application such as
Apple Printer Utility
or
LaserWriter Utility
to
change the zone configuration in the Macintosh EtherTalk environment. These
utilities are distributed by Apple Computer, Inc.
Note
❒
If your Macintosh is configured to use TCP/IP, you can change the zone con-
figuration with a Web browser.
⇒
P.54
“Configuring the Network Interface
Board with a Web Browser”
Follow these steps to use the Apple Printer Utility.
A
Insert the CD-ROM in the CD-ROM drive.
B
Copy the “Zone Name.ps” file in the “Zone Name” folder to the hard disk.
C
Open the copied “Zone Name.ps” file using a text editor, and change “New-
Zone” , which is in the second line from the bottom, to the name of the new
zone.
%!PS-Adobe2.0 %%
Title: Changing Zone (EtherNet only)
%%CreationDate: Tue Dec 16 1997
%%EndComments
true 0 startjob not {ERROR}if
(%EtherTalk%) << /EtherTalkZone (
NewZone
) >> setdevparams
%%EOF
D
Save “Zone Name.ps”.