Operating instructions

Configuring the Printer for the Network with the Operation Panel
14
2
D Select the protocol you want to
use. You can select one of the
items on the table below.
•
'
means that this protocol is ac-
tive.
• Blank cell means that this proto-
col is not active.
*1
TCP/IP
*2
NetWare
*3
Ether Talk
*4
NetBEUI
Note
❒
You should not select protocols
that are not used on your net-
work.
A Press
{U}
or
{T}
to display
“39.Active PTL.”.
<System Menu> j
39.Active PTL. l
B Press
{
# Enter
}
.
The current setting appears on
the panel display.
<Active PTL.> j
*All Active l
C Press
{U}
or
{T}
to display the
protocol you want to use.
D Press
{
# Enter
}
.
The actual procedure may differ
depending on the protocol you
use. Follow the appropriate
procedure.
E If you use TCP/IP, you should as-
sign the IP address to the printer.
Note
❒
To get the IP address for the
printer, contact your network
administrator.
A Press
{U}
or
{T}
until the fol-
lowing message appears.
<System Menu> j
32.IP Address l
B Press
{
# Enter
}
.
The current IP address appears
on the panel display.
011.022.033.044
j jl/#
Menu item on
the panel
display
Active Protocol
TCP
*1
NW
*2
ET
*3
NB
*4
All Active
(Default Setting)
''''
None
TCP/IP Only
'
NetWare Only
'
TCP & NetWare
''
EtherTalk Only
'
TCP & Ether-
Talk
''
NetW & Ether-
Talk
''
TCP & NW &
Ether Talk
'''
NetBEUI Only
'
TCP & NetBEUI
''
NetW & Net-
BEUI
''
TCP & NW &
NB
'' '
ETalk & Net-
BEUI
''
TCP & ETK &
NB
'''
NW & ETK &
NB
'''
TCP/IP E
V
F
V
G
V
H
V
J
NetWare I
V
J
AppleTalk J
NetBEUI J