Operating instructions

NetWare 3.x - Advanced Settings
33
3
B
To create a new print server, press the
{ INSERT }
key and type a print
server name.
If you use the currently defined print server, select one of the print servers
shown in the
[
Print Server
]
list.
Important
❒
Use the same name as that specified in NIB Setup Tool. ( Step
H
)
C
From the
[
Print Server Information
]
menu, select
[
Print Server Configuration
]
.
D
From the
[
Print Server Configuration
]
menu, select
[
Printer Configuration
]
.
E
Select the printer which is indicated as “Not Installed”.
F
If you change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. “x” stands for the number of
the selected printer.
G
As Type, select
[
Remote Other/Unkown
]
.
The IRQ, Buffer size, Starting form and Queue service modes are automat-
ically configured.
H
Press the
{
ESC }
key, and click
[
Yes
]
in the confirmation dialog box.
I
Press the
{
ESC }
key to return to the
[
Print Server Configuration
]
menu.
N
Assign print queues to the created printer as follows.
A
From the
[
Print Server Configuration
]
menu, select
[
Queues Serviced By Printer
]
.
B
Select the printer created in step
M
.
C
Press the
{
INSERT }
key to select a queue serviced by the printer.
Note
❒
You can select more than one queue at a time.
D
Follow the instructions on the screen to make other necessary settings.
When you have finished the previous steps, confirm that the queues are as-
signed.
O
Press the
{
ESC }
key until “Exit?” appears, and select
[
Yes
]
to exit PCON-
SOLE.
P
Turn the printer power off and on.
Note
❒
To confirm that the printer is configured correctly, type the following from
the command prompt.
F:> USERLIST
❒
If the printer works as configured, the name of the print server appears as
an attached user.