Operating instructions

NetWare 3.x - Advanced Settings
31
3
NetWare 3.x - Advanced Settings
The actual procedures for configuring the printer may differ depending on
whether the Network Interface Board is configured as a print server or as a re-
mote printer. This section describes how to configure it in the NetWare 3.x envi-
ronment.
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. When you configure the Network Interface Board
as a NetWare print server for the first time, we recommend that you use the
Wizard method.
⇒
P.28
“Quick Setup Using the NIB Setup Tool Wizard”
Note
❒
This section assumes that NetWare is functional and that the necessary envi-
ronment for the NetWare Print Service is available.
Setting up as Print Server
A
Log in to the file server as a Supervisor or a Supervisor equivalent.
B
Run NIB Setup Tool.
Reference
⇒
P.27
“Running NIB Setup Tool”
C
Click
[
Property Sheet
]
and click
[
OK
]
.
The
[
Browse
]
dialog box of the Network Interface Board appears.
D
Click
[
IPX protocol
]
.
Installing NIB Setup Tool
Print Server Remote Printer
Basic Procedure
Configuring the Network Interface Board
Configuring the NetWare
Turning the power
off and on
Starting the print server