Operating instructions

Windows NT 4.0 Configuration
18
2
I
After the
[
Setup Complete
]
dialog box appears, click
[
Yes, I want to restart my
computer now.
]
, and click
[
Finish
]
.
The computer restarts, and Multidirect Print can now be used. If you select
“No”, be sure to restart the computer manually before launching Multidirect
Print for the first time.
Go to P.18
“Setting up the Printer Driver”
after the computer restarts.
Setting up the Printer Driver
Using Multidirect Print to print is not possible until the printer driver is installed
and the correct port is selected.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer drivers.
If the printer drivers have already been installed, you can go to the next step.
Reference
For more information on installing the printer driver, see the "Printer Ref-
erence" that is provided as a paper manual.
Note
❒
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
In the
[
Printers
]
window, click the icon of the printer you want to use. On
the
[
File
]
menu, click
[
Properties
]
.
C
Click the
[
Ports
]
tab, and click
[
Add Port
]
.
D
In the
[
Available Printer Ports
]
box, click
[
Multi Direct Print
]
, and then click
[
New
Port
]
.
The
[
Select Printer
]
dialog box appears, and the names of the printers which
can print with TCP/IP appear.
Limitation
❒
If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP do not appear.
❒
You cannot add to type the port name that was already used.
Note
❒
The printers which have replied to a broadcast from the computer are list-
ed here. To print to a printer that is not on this list, or to directly type the
port name, click
[
New Printer
]
, and click
[
Next >
]
, and then type the port
name in step
G
.