Operating instructions

Windows NT 4.0 Configuration

Preparing for a Network Connection

Preparation

Multidirect Print supports the TCP/IP protocol and the NetBEUI protocol.

Consult the network administrator before selecting the protocol.

Limitation

❒

When you use the NetBEUI protocol, you cannot print to a printer which is

located on the other side of a router.

Note

❒

You can use both TCP/IP and NetBEUI protocols, in a computer. To use both

protocols, you must first install them.

Preparing to Use the TCP/IP Protocol for Printing

Follow these instructions to configure the Network Interface Board and Win-

dows NT to use the TCP/IP protocol.

Configuring the printer

Configure your printer to use the TCP/IP protocol.

• Confirm that the TCP/IP protocol is set to active. (The default setting is ac-

tive.)

• Assign an IP address and make other settings required for using the TCP/IP

protocol.

Basic Procedure

Installing Multidirect Print

Configuring Windows environment

Assigning the IP address

TCP/IP NetBEUI

Selecting the protocol

Installing the printer driver

Changing the port

TCP/IP

NetBEUI

Windows NT 4.0