Operating instructions

Configuring Windows 95/98
11
1
Limitation
❒
You cannot use a host name that begins with “%%”.
❒
You cannot use the port name that is already in use.
Note
❒
When you use DHCP to assign IP addresses to Network Interface
Boards, you can use a printer name (Current Hostname on the network
configuration page) as the host name.
Typing the port name for use with the NetBEUI protocol
A
Print a configuration page, and confirm the Network path name.
Reference
For more information on printing a configuration page, see the "Printer
Reference" included as a PDF file in the CD-ROM.
B
Type the printer's network path name in the form of “%%Computer
name \Share name”. Do not type “\\” as head characters but “%%”.
H
Confirm the port name in the
[
Port Name
]
box, and click
[
Finish
]
.
I
Confirm that the port name is displayed in the
[
Print to the following port
]
box,
and click
[
OK
]
.
Configuration is complete.
When you print, the printing procedure is no different. When you select the
printer configured here, the computer automatically uses Multidirect Print.
Uninstalling Multidirect Print
A
Open
[
Control Panel
]
, and double-click the
[
Add/Remove Programs
]
icon.
B
With the
[
Install/Uninstall
]
tab, click
[
Multi Direct Print
]
, and click
[
Add/Remove
]
.
C
After a confirmation message appears, click
[
Yes
]
.
UninstallShield removes all of the components of Multidirect Print.
D
When the uninstallation is complete, restart the computer.