Operating instructions

Windows 95/98 Configuration
10
1
Note
❒
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
In the
[
Printers
]
window, click the icon of the printer you want to use. On
the
[
File
]
menu, click
[
Properties
]
.
C
Click the
[
Details
]
tab, and then click
[
Add Port
]
.
D
In the
[
Add Port
]
box, click
[
Other
]
, and click
[
Multi Direct Print
]
, and then click
[
OK
]
.
The
[
Select Printer
]
dialog box appears, and the names of the printers which
can print with TCP/IP appear.
Limitation
❒
If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP do not appear.
Note
❒
The printers which have replied to a broadcast from the computer are list-
ed here. To print to a printer that is not on this list, or to directly type the
port name, click
[
New Printer
]
, and click
[
Next >
]
, and then type the port
name in step
G
.
E
To print using the NetBEUI protocol, click
[
NetBEUI
]
.
F
Click the printer you want to use, and click
[
Next >
]
.
Reference
For more information on a particular item in the dialog box, see P.51
“Mul-
tidirect Print”
.
Note
❒
You can identify the “Printer Name” and “Address” on the configuration
page printed by the printer.
❒
You cannot add the partly same address that was already used. For exam-
ple, when “192.168.0.2” was already used, “192.168.0.2xx” cannot be used.
Similarly, when “192.168.0.20” was already used, “192.168.0.2” cannot be
used.
G
Confirm that the port name of the printer is correct, and click
[
Next >
]
.
If you did not select a printer in step
F
, you must type the port name.
Typing the port name for use with the TCP/IP protocol
A
Type the IP address of the Network Interface Board into the
[
IP address
]
box.
You can type the host name or a domain name instead of an IP address into
the
[
Host Name
]
box.