Operating instructions

Using RICOH-SCRIPT2 with a Macintosh
22
2
• Color Setting
Use this to set the correction method used for the color conversion. The fol-
lowing items are available:
[
Off
]
*1
,
[
Vivid
]
*2
,
[
Super Vivid
]
*3
,
[
Fine
]
*4
,
[
Super
Fine
]
*5
.
*1
No modification to the color setting.
*2
Select this setting to perform CMYK conversion with enhanced saturation and
brightness to print vivid colors.
*3
Select this setting to perform CMYK conversion. The colors printed with this
setting are more vivid than those printed with the ”Vivid” setting. All of the
colors in the image, especially the lighter ones, are emphasized.
*4
Select this setting to perform color matching based on the printer's built-in
color rendering dictionaries, and perform CMYK conversion. It makes it pos-
sible to print colors that are close to the displayed colors on the computer
screen.
The color rendering dictionaries refer to the contents selected by the Color Pro-
file. This setting is useful when the application and printer driver do not sup-
port the color matching features.
*5
Like the “Fine” setting, the color rendering dictionary is used, however, output
is more vivid. This setting is enabled to make light colors print more vivid.
Note
❒ The color rendering dictionary that is selected on the Color Profile set-
tings is used.
• Color Profile
Use this to select a color rendering dictionary (CRD). The CRD is referred
to for color matching, so you should select the appropriate CRD for the
document you are printing. The CRD you select is also referred to when
“Fine” or “Super Fine” is selected for the “Color Setting”. The following
items are available:
[
Photograph
]
*1
,
[
Presentation
]
*2
,
[
Solid Color
]
*3
.
Note
❒ When selecting
[
OHP
]
as the paper type, the CRD automatically adjusts
to use a color profile specifically for OHP. Even though the color profile
has been optimized for OHP, the adjustments are automatic and are not
indicated on any of the dialog boxes. In this case, this setting is not ena-
bled.
*1
Use this setting to enhance the reproduction of photos and graphics that in-
clude midtones.
*2
Use this setting to enhance the reproduction of documents that contain text
and graphics. This CRD is best for printing colored charts, graphs, presenta-
tion materials and so on. If you use this CRD for printing photographs, color
or gradations might not be reproduced well.
*3
Use this setting to print specific colors, logos and so on.
• Smoothing
Use this to set Smoothing to
[
Off
]
or
[
Auto
]
.
Limitation
❒ When the Color Level is set to
[
1 bit
]
, Smoothing is enabled.
❒ When Toner Saving is selected, Smoothing is not enabled.
• Toner Saving
Use this to set Toner Saving to
[
On
]
or
[
Off
]
.