Operating instructions

Using the Operation Panel
56
5
❖
2. I/O Buffer
You can select the size of the I/O buffer. Normally it is not necessary to
change this setting.
• 16KB
• 32KB
• 64KB
•
128KB
• 256KB
• 512KB
❖
3. Transfer
You can select the data transfer speed of the parallel interface. If you are hav-
ing trouble with data transfers, try changing this setting to “Normal”.
•
Hi-speed
•Normal
❖
4. Image Memory
This setting controls what the printer does when the printer memory is not
enough to print a certain page.
•
Off
•On
❖
5. Parallel
You can select the parallel interface timing setting. Normally it is not neces-
sary to change this setting.
•ACK Inside
•
ACK Outside
•STB Down
❖
6. Bi-direction
You can select the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the "Standard" setting when you
are experiencing problems while the printer is connected to another manufac-
turer's print box.
•
Original Mode
• Standard
❖
7. OHP Slip
The OHP Slip is a sheet of paper placed between printed OHP transparencies.
You can set this option to off or on.
•
On
•Off