Operating instructions

Menu Table
55
5
❖
I/O Timeout
Use this setting to set how long the printer waits for more print data before
ending its wait period and terminating a job. The job is automatically can-
celled if no data is received for the selected time.
•
300 Sec
• 0 (Off) to 999 seconds
❖
Feed timeout
Use this setting to set how long the printer waits for the correct paper size
loaded, when paper runs out while printing. The job is printed with the paper
currently loaded if the correct size is not loaded within the selected time.
•
60 Sec
• 0 (Off) to 999 seconds
❖
Print Errors
Use this setting to select if an error report should be printed from the current
tray when a PostScript error occurs while printing.
•
Off
•On
❖
Ktalk Mode
This setting is not available.
❖
Parallel IF
Use this setting to select the parallel interface timing. When “System Default”
is selected, the setting in the “System Menu” is used.
•
System Default
•ACK Inside
• ACK Outside
System Menu
The following are the settings you can make with the “System Menu”.
Note
❒
Italicized settings indicate default settings.
❖
1. Paper Tray
You can select the default paper tray whenever you turn on the printer. Only
available trays will be displayed.
•
Tray 1
• Tray 2
• Tray 3
• Tray 4
•Bypass